簡単な方法は、「Hackintosh」系のサイトを片っ端から調べれば良いかと思います。
色々なツールがあるので、OSをお持ちの方はツールを使ってインストールが良いかと思う。
ちょっと悪い子の場合は、TorrentサイトからCPUにあったOSイメージでインストールが安全だと思う。OS10.5ベースの時代の方がスピードが速くてオススメです。
かなり遊び倒させてもらったNB100だけど、貸したら戻って来なくなったので記事が書けません…。
vaio typePならあるけど、typePにOSXを入れる本などがあるのであんまり有用じゃない気がするのでずっと記事をかけないままでした。
案外最近のファイルを見つけたのでリンク張っときます。
私は確認していないので、人柱覚悟でどうぞ。
↓
「MAC OS X for non-Apple PC」
細かい説明は続きを見てね！
1- This DVD is designed for Non-Apple x86 Intel CPU computers.
Requirements for OSX86:
Minimum: Compatible motherboard, Intel SSE2 CPU, 512MB RAM, 15GB free space on target partition, compatible VGA card.
Recommended: Intel Core CPU, 1GB RAM, 15GB free space on target partition, Snow Leo compatible nVidia 6600 or newer / ATI X1300 or newer / Intel GMA 950 or X3100 VGA card.
Motherboard (the most important part) should be compatible for booting iATKOS S3 DVD and installing natively.
2- This DVD includes Apple's Mac OS X Leopard 10.6.3 (10D573) installation, some basic drivers and x86 patches.
3- IMPORTANT NOTICE - Make sure that the md5 checksum of your iATKOS iso image matches the one posted on our website. Do this MD5 check just before mounting or doing anything with the iso image! Otherwise you may have a faulty DVD image. Use quality media/burner and burn slowly.
4- MAKE SURE YOU TAKE NOTE OF YOUR Hardware IDs, Device IDs and device names before installing this system. This is very important. If you aren't sure what devices/hardware you own nor its IDs, then 3 options:
-Boot iATKOS S3 DVD, run "Hardware Info" from Utilities menu and take notes.
-Fire up a Linux Live CD (ie. Ubuntu Live CD), type "lspci -nn" in terminal and take notes.
-Windowsers, get Everest Ultimate Edition and take note of your hardware.
5- Do a google search or surf to InsanelyMac, Hackint0sh, our forum, related OSX86 sites or wiki to find out if your hardware is supported or not. OSX86 does not support a wide range of hardwares like Linux and Windows. Make sure that it is supported before you install. This is very important because after installation you may ask like "how can I get this hardware to work" and people would simply slap you with "it will never work". This little search will avoid your frustration and anger! Extending your lifespan!
6- If something goes wrong, please don't panic, Scroll down for the Troubleshooting guide. If that fails, take a screenshot (or a picture) of what went wrong and post it in the forums. Make sure you have done the 3 Revival steps and troubleshooting steps before posting in the forum!
7- Do not forget one thing: IF THE INSTALL ENDS WITH SUCCESS, THEN MOST LIKELY IT CAN RUN ON YOUR HARDWARE. This means if you have a major booting error after installation like kernel panic, "still waiting for root device" error, hang on grey apple screen etc. then this is mostly related to your faulty selections during install, read the instructions carefully and do a very basic install until you boot your new system with success.
8- iATKOS wallpapers and icons are made by @denizckosar
Change log Ver.2:
- IOATA and RTC panic problems on some 945 and 965 motherboards
solved.
- 32-bit RTC package added for those problematic motherboards.
- AppleIntelPIIXATA Non-AHCI SATA driver that supports 6 ports added.
- Language packs updated to 10.6.3 version since they were from 10.6.0
and they caused some annoying bugs, so they are ok will be ok by the
upgrades from now (except the Turkish language which is not supported
by Apple).
- VoodooHDA upgraded from 0.2.2 to 0.2.6.1.
- Intel Pro V100 ethernet driver updated. Now it is 64/32 and working good.
- Marvell 88E8038 ethernet support added.
- Kext Utility updated to 2.4.2 version which works better.
System requirements:
Minimum:
- Intel support SSE2/SSE3
- 512 MB RAM
- 128 MB Graphics Card
- 15 GB of free disk space
Recommended:
- Processor Intel Core
- 1 GB RAM
- 15 GB of free disk space
- "SnowLeo-compatible" nVidia 6600 or higher / ATI X1300 or higher / Intel GMA 950 or X3100 graphics card.
MAC for AMD
Mac OS X Leopard for AMD and Intel v10.5.1
Works on AMD and Intel PC's Processors
Tools that we will use along the instalation:
1. How to Dual-Boot Video Tutorial Added On Bottom.
2. Acronis Disk Director Suite Updated (Keygen Separate upload added)
3. Everest Ultimate Uploaded ( Needed in Video to Check CPU and PC Specs )
http://www.apple.com/macosx/
HowTo OSX
DISK IS PREPATCHED this is ISO Format so burn image to a disk and your ready to install simply.
Install Leopard
Now lets install Leopard.
1. Optional but Highly recommend: install Tiger first. This can be done by inserting Tiger DVD on your computer and make sure you boot from it. Usually that’s done if you press F8 or F12 or whatever key combination to give you the option to choose what disk/cd drive you want to boot from. Or you can always change boot device in BIOS setup. Select your CD/DVD drive. And
Select your language and when the welcome screen shows up
1. Select Utilities -> Disk Utility
2. Select your partition that you want to be OSX and go to the Erase tab
3. For Volume Format, select Mac OS Extended (Journaled), set volume name as “Leopard“(no quotes, case sensitive)
4. Click Erase. Now the partition should not be grey, it should be black to indicate that it is active.
5. Close out of the Disk Utility and move onwards with installation.
Use “Customize” option and unselect all packages there. Just install base system. By installing Tiger first, the partition would be properly formatted and activated, which eliminate any potential problem. Now reboot and remove the Tiger DVD.
2. Install Leopard.
Insert Leopard DVD, and make sure to select booting from DVD. The installer will load(it will take a while, be patient). If you have Tiger installed, don’t format the partition, just install it over the Tiger partition. Otherwise, same approach as Tiger installation, use Disk Utility to setup the partition.
Important: Use Customize… button and unselect all packages there. Then proceed to installation. When it’s done, reboot. And make sure that your USB/Pen Drive is connected to your PC.
Patch Leopard Installation
After the reboot, also make sure you do the same step above: Press whatever key combination to give you the option to choose your boot device: Now Select your CD/DVD drive.
Once the setup is loaded(again, long wait, be patient), select your language. When the welcome screens shows up, select UTILITIES-TERMINAL. The terminal will now open. We will now browse to our Thumb Drive;
In the command line, type:
cd /Volumes/123/files
Lets now run the script. This will patch the installation so it will boot properly:
./9a581PostPatch.sh
Let it run. You can answer yes when removing the ACPUPowerManagement.kext
Reboot.
The Bootfix patch
After reboot, if the system boots into Leopard fine, ignore this part and head to next section to setup multi boot. Otherwise, you might encounter blinking cursor or “HFS+ Error”, follow the steps below then
If you install Leopard without Tiger first, the system might still boot into Windows instead or leave a system unbootable at all. Even the tboot loader trick(see below) wouldn’t work. In this case, you need to repair the installation and setup boot property for it.
1. Reboot using the Leopard DVD, make sure the USB pen drive is connected.
2. Open a terminal after everything finally loads.
3. Find out what disk your leopard was installed on by issuing this command (my machine was rdisk0s2, will use rdiskXsY below, substitute accordingly)
diskutil list
4. Active the partition
fdisk -e /dev/rdiskX
fdisk: 0>update
fdisk:*0> f Y
“Partition 2 marked active”
fdisk:*0> w
Device could not be accessed exclusively.
A reboot will be needed for changes to take effect. OK? [n]y
Writing MBR at offset 0.
fdisk: 0> q
5.
Now goto bootfix directory by typing:
cd /Volumes/123/files/bootfix
and do the following
./dd if=/usr/standalone/i386/boot1h of=/dev/rdiskXsY bs=512 count=1
umount /Volumes/Leopard
./startupfiletool -v /dev/rdiskXsY /usr/standalone/i386/boot
./bless -device /dev/diskXsY -setBoot -verbose
reboot
Post Installation: setup multi-boot
2. Now you’re already in the exciting Leopard! After initial setup, load up Terminal(Applications/Utilities) within OSX and type
sudo nano /Library/Preferences/SystemConfiguration/com.apple.Boot.plist
edit the Darwin time-out flag accordingly:
reboot and now you can choose Mac OSX/XP/Vista using Leopard’s boot loader.
3. Optional: you can also setup Windows as default OS and use windows’ OS selector to launch OSX.
So reboot and select Windows partition, load Windows. Open a command prompt(if you’re using Vista, make sure it’s running as administrator). Use diskpart to mark the Windows partition active.
1. Type diskpart
2. If you have more than one disk, at the DISKPART prompt, type:
list disk
3. At the DISKPART prompt, type:
select disk x
Select the disk, x, where the partition you want to mark as active in
4. At the DISKPART prompt, type:
list partition
5. At the DISKPART prompt, type:
select partition y
Select the partition, y, you want to mark as active.
6. At the DISKPART prompt, type:
active
to active the selected partition and system will boot from it next time.
7. At the DISKPART prompt, type:
exit
to quit the diskpart program
This will mark Windows partition as active, and the system will boot off it next time. If the PC has Windows XP installed, get this tboot(512 bytes only, a revised version of chain0 loader, support multi HDD as well as loading OSX on extended partition) file and put it to the same directory as ntldr(usually C, adding the following line to boot.ini
c:tboot="Mac OSX Leopard"
If the PC is Vista only, put ntldr(get one from your XP installation CD), tboot and a boot.ini file to your Vista boot partition, for example
[boot loader]
timeout=0
default=c:tboot
[operating systems]
c:tboot="Mac OSX Leopard"
Vista will automatically detect and add the Leopard entry on next boot.
Also, for Vista users, you may use bcdedit to add tboot, but the ntldr way is much much more easier. Anway, if you prefer the native Vista bootloader, here is how:
Code:
1.
put tboot on Vista boot partition, usually C:
2.
Open a command prompt and make sure it’s running as administrator and type:
bcdedit /create /d "Mac OSX Leopard" /application bootsector
This will retrun a {ID}
3. Use the command line below to add the tboot, replace the {ID} accordingly:
bcdedit /set {ID} device boot
bcdedit /set {ID} path tboot
bcdedit /displayorder {ID} /addlast
That’s all. Enjoy the new Leopard!
